The iDVR-PRO already accessible from the Safari web browser from iPhones, however it was not very convenient for users to always have to type in the URL of their DVR and enter their login information. Now, users can save their DVR and camera settings in the iCamViewer app and just launch the app when they want to view their cameras.
iCamViewer iPhone App iDVR PRO Setup
To setup the an iDVR-PRO recorder to be accessible from the iCamViewer, users can follow these instructions.
Connect the iDVR-PRO to your network router and switch
Configure port forwarding on your router so that your DVR can be accessed from outside of your local network. If you need help with this step, please refer to this page for port forwarding instructions.
Note: the default port for the iDVR-PRO is 8080
It is recommend that you test the Internet access from the safari web browser in your iPhone to confirm that port forwarding and the connection is working properly before configuring the iCamViewer app.
After you confirm that the connectivity is setup correctly through Safari, download the iCamViewer app from the app store.
Open the app on your iPhone or iPad and click on the Config button in the My Cams section of the app.
Fill in all of the configuration fields:
Name: This is any name you want for your camera.
Host or IP: This is the public (not LAN) IP address where your iDVR-PRO is located. If you are using a DynDNS service, you can enter the hostname here.
Port: 8080 is the default port
Username: ADMIN is the defaul username
Password: 1234 is the default password
Manufacturer: Choose CCTV Camera Pros
Models: Choose iDVR-PRO Cam 1 to view camera 1, iDVR-PRO Cam 2 for camera 2, so on and so forth
Tap the check box in the upper right
Your camera should come into view
Không có nhận xét nào:
Đăng nhận xét